Rotax 532 point, Rotax 532 condensors, intake sockets, pistons,
rotary valve shaft prices.
|
|
 Points
- 2 sets required, replace as necessary if found worn, or damaged.
Remember to lubricate phenolic blocks. Check point gap within 10 hours
of new point installation
983 343 |
|
Points
983 343
$24.95 |
|
| |
|
|
 Condensers
-
2 required, replace as necessary if found to be damaged, oil soaked, loose fitting or
defective.
Threaded 964 219
|
|
Condensers
Threaded 964 219
|
|
| |
|
Spark plugs -
2 Required B8ES NGK, replace as necessary, if found damaged, worn or defective.
Spark plug gap .015
| NGK B8ES standard
|
NGK B8EV gold palladium
|
| NGK BR8ES resistor
|
NGK BP8ES extended tip
|
|
Wrist pin bearing 2
required
Replace as necessary if found to be damaged or worn. Newer style cageless bearing
recommended if engine equipped with new style pistons Part# 832 320
|
|
Wrist pin bearing
832 320
$42.50 |
|
| |
|
Pistons - 2 required when ordering pistons
rings come with pistons. |
|
Pistons STD
996 490 $215.50
Pistons 1st over 996 491 $230.50
Pistons 2nd over 996 492 $245.50 |
|
|
Diagnosing piston failure |
|
|
Rotax Rubber
intake socket part number 267 785
This socket fits the 532 Rotax engines equipped with the
Bing carb. It is a regular maintenance item and should be replaced
at the first sign of cracking. Areas of the socket that should be checked regularly are located
around the bolt holes and underneath the retaining clamp. For longer life, where possible support
the back of the carb(s) and breather. Prior to installation clean
socket with acetone install socket, tighten but do not over
tighten the clamps. Coat exposed area with dielectric grease. This will lubricate
socket and help prevent UV deterioration. |
|
Intake socket for
Rotax 532
267 785
$76.95 |
|
| |
|
|
Rotax 532 Seal and Gasket
set includes all the seals and gaskets necessary to rebuild 1 Rotax
ultralight engine.
994 428 |
|
Rotax 532 Seal and Gasket
set
994 428
$176.00 |
|
| |
|
|
532
rotary valve shaft for
non oil injection system
937 962
|
|
532
rotary valve shaft
937 962
$186.50 |
|
|
|
|
|
Rotax 532 Rotary Valve Gear 935 730
|
|
Rotary Valve gear
935 730
$105.00 |
|
| |
|
|
Rotax 532 Rotary Valve Spring 938 810 |
|
Rotax 532 Rotary Valve Spring
938 810
$9.50 |
|
| |
|
|
Rotax 532 crankshaft 995
331 |
|
Rotax 532 crankshaft
995
331
$1663.00 |
|
| |
|
|
|
|
Rebore cylinders @$85.00 per cylinder |
|
|
Labour @$99.95 per hour |
|
|
Shop Supplies @$10.00 per unit |
|
| |
|
|
| Have high speed internet & Real Player
installed? Subscribers to the Ultralight Flyer web video magazine
have access to Rotax Engine Rebuilding videos right on the web. |
|
1
2 3 4
5 6 7
8 9 10
11 12 13
14 15 16 Index for this section. |
|
|
|
|
 |
|
Ultralight Aircraft News Web Magazine .-.-.-. .
No part of this
publication may be copied or distributed, transmitted, transcribed,
stored in a retrieval system, or translated into any human or computer
language, in any form or by any means, electronic, mechanical,
manual, or otherwise, without written permission .
By copying or paraphrasing the intellectual
property on this site, you're automatically signing a binding contract
and agreeing to be billed $10,000 payable immediately. Copyright Ultralight News - Ultralight Flyer.
|
|
