Rotax tools, Rotax special tools, Rotax magneto puller, Rotax fan locking tool, Rotax gear puller.

Light Sport & Ultralight Aircraft Information.
Resource Site

Magneto puller
Two part puller used to pull magneto on all Rotax points ignition systems.

876 065 Puller (20)	$58.00
876 080 Puller ring (18)	$57.25
940 580 Bolts (19) 3 required	$ .75
Fan wrench tool 876 357	$14.85

876 950 Dial indicator
Used to aid in timing all Rotax engines equipped with points and condenser ignitions systems. Can also be used for any continuity tests.

Alignment bar(s)
Used to align cylinders prior to torquing heads on 503/582 Rotax Ultralight Engine Info. Cylinder alignment tool 876 570
( You can also place the cylinder head on upside down to align cylinders.)

Wrist pin clip insertion tool
Used to install wrist pin clips in piston on all Rotax Ultralight Engine Info. Part # 877 015
This tool is a must - while it can be done with an ice pick style probe the tool pays for itself in less "aggravation."

$103.77

Piston fixation - 1 required tool a specially designed tool for holding pistons in place , when reinstalling cylinders. (A pair of pliers with rubber coated handles will work.)

Reduction drive gear puller
Used to pull gear on crankshaft on most Rotax Ultralight Engine Info equipped with Rotax A and B reduction drives.
276 808

$69.95

Crankshaft locking pin
A specially designed pin for locking up the crankshaft on Rotax Ultralight Engine Info. The use of any other pin for this purpose can cause severe engine damage. Part #876 640 Crankshaft fixation pin.
This pin is comes with the Rotax engine tool kit.

Piston pin puller
Used to remove wrist pins from piston, and install and remove cageless bearings. 877-091

	$299.95

Looking for a heater to keep you warm while flying? Click here for more information!

Ultralight Aircraft News.ca Magazine
Resource Site

Ultralight Aircraft News.ca Web Magazine Resource Site . No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in any form or by any means, electronic, mechanical, manual, or otherwise, without written permission . By copying or paraphrasing the intellectual property on this site, you're automatically signing a binding contract and agreeing to be billed $10,000 payable immediately. Copyright UltralightNews.ca .